Get started
Get started with your Plantsoon labels
Your labels have arrived. Here's how to put them in place and connect them to your plants, step by step.
What did you receive?
Pick the labels in your box and follow the steps.

Tags
S-tag, M-tag, Square tag
-
Set up your digital pages
Make sure each plant, zone, collection or garden feature you want to label has its own page in your dashboard. A label can only link to a page that exists.
-
Link each label in your dashboard
Connect each label to its digital page, so every scan lands in the right place.
How to link your labels → -
Mount your labels
Choose how to mount each label.

Custom signs
L-sign, XL-sign
Mount them and you're done. Your signs come linked to the right plants, so all that's left is putting them in place.
Choose how to mount each label.
Got both? Follow both.
Mount your labels
Each spot asks for its own method. The table below shows which method fits which label.
Mounting hardware supplied by Plantsoon
Order these with your labels. Each guide lists what is in the box, the tools you need and every step.

Stakes
Push an aluminum stake into the soil next to the plant. Works for trees as well as borders, shrubs and young plants.
- FitsL- and XL-signs
- ToolsWork gloves

Screw sets
Fix the label into the trunk with a stainless screw and spring, so the tree can keep growing without swallowing it. Only suitable for trees with a sufficiently thick trunk.
- FitsAll except square tag
- TrunkThick, mature trees only
- ToolsScrewdriver or drill driver with a TX20 bit
Mounting with your own materials
Plantsoon doesn't supply these. Buy them yourself at a garden or hardware store.

Screws
Screw the label onto a wooden pole or post, such as the support pole of a young tree or the posts around a border.
- FitsAll except square tag
- ToolsScrewdriver or drill driver
Use wood screws, preferably stainless steel.

Cable ties & tie tubes
Hang the label from a branch or fence. A loose loop gives the branch room to thicken.
- FitsS-, M- and L-tags
- ToolsNone
Choose UV-resistant cable ties or tie tubes.

Glue
Glue the label onto a flat, solid surface such as a stone, wall, bench or sign.
- FitsSquare tag
- ToolsNone
Use an outdoor mounting adhesive suitable for aluminum.
| Which method fits which label? | S-tag | M-tag | Square tag | L-sign | XL-sign |
|---|---|---|---|---|---|
| Stake | No | No | No | Yes | Yes |
| Screw set (trunk) | Yes 1 set | Yes 2 sets | No | Yes 2 sets | Yes 2 sets |
| Pole or post (own screws) | Yes | Yes | No | Yes | Yes |
| Cable tie / tie tube (own ties) | Yes | Yes | No | Yes | No |
| Glue (own glue) | No | No | Yes | No | No |
Stuck halfway?
Email support@plantsoon.com with a photo and we'll help you out.